Temp control

Discussion in 'Temperature Control' started by Mdk, Feb 14, 2018.

  1. Mdk

    Mdk Member

    Joined:
    Feb 11, 2018
    Messages:
    15
    Likes Received:
    47
    I usually like watt settings. But, the therion dna 166 is a really good temp mod. I've paired it with the smok tfv4 with tasty results. It's not for the huge clouds, more for great taste. Clouds are decent though!
     
  2. ParaTech

    ParaTech What's the DEAL? Moderator

    Joined:
    Jul 19, 2017
    Messages:
    1,651
    Likes Received:
    5,224

    What coils?
    Or are you using the RBA section?
     
  3. Mdk

    Mdk Member

    Joined:
    Feb 11, 2018
    Messages:
    15
    Likes Received:
    47
    Tfv4s. Between job and taking care of sick wife. Don't have much time for rbas anymore. It is one of the temp control series coils. There are a bunch of Tf V4 coils. I cant remember which. I will look at box when I get home. If I still have it. Have a good day
     
    Last edited: Feb 15, 2018
  4. Mdk

    Mdk Member

    Joined:
    Feb 11, 2018
    Messages:
    15
    Likes Received:
    47
     
  5. Shaulisbvape

    Shaulisbvape Well-Known Member

    Joined:
    Jan 18, 2018
    Messages:
    593
    Likes Received:
    2,158
    I think they are nickel and titanium.
     
  6. Mdk

    Mdk Member

    Joined:
    Feb 11, 2018
    Messages:
    15
    Likes Received:
    47
    Nickle. Found box. Don't use the mod that much.
     
  7. Shaulisbvape

    Shaulisbvape Well-Known Member

    Joined:
    Jan 18, 2018
    Messages:
    593
    Likes Received:
    2,158
    Have to be careful with nickel. Its can be dangours if used in power or watt mode.
     
  8. Mdk

    Mdk Member

    Joined:
    Feb 11, 2018
    Messages:
    15
    Likes Received:
    47
    Yes, Thanks. Only use it in temp mode. I make sure screen is locked, so there are no issues.
     
    Shaulisbvape likes this.
  9. LionHo

    LionHo New Member

    Joined:
    Apr 25, 2019
    Messages:
    1
    Likes Received:
    0
    Hi...the heating can be controlled from the distribution manifolds via the zone actuators. I’ll be building a multizone controller with an output for each zone actuator, one for the boiler pump, one for the recirc pump and a potential free contact for the boiler heat demand. An on board arm processor will allow me to set this up and run it as a standalone unit should the network fail. The arm will run heat demand and set-point control for each zone. I’ll have USB serial IO in to it as well as being able to communicate over the mesh through an access point.
     
  10. Whiskey

    Whiskey The TCIC Staff Member Moderator 2 year member Head of Giveaways

    Joined:
    Jul 19, 2017
    Messages:
    32,432
    Likes Received:
    136,038
    On what mod?
     
  11. Vapin4Joy

    Vapin4Joy 2 year member reviewer

    Joined:
    Jul 19, 2017
    Messages:
    18,530
    Likes Received:
    65,168
    Troll
     
    Whiskey likes this.

Share This Page