ParaTech Review of AugVape Boreas V2 RTA

Discussion in 'Atomizers' started by ParaTech, Dec 10, 2017.

  1. ParaTech

    ParaTech What's the DEAL? Moderator

    Joined:
    Jul 19, 2017
    Messages:
    1,651
    Likes Received:
    5,223
    This was sent directly from AugVape for this review

    [​IMG]

    Available in Black or Stainless

    Packaging and contents:
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    [​IMG]

    Drip Tip:
    (810 style)
    11.5mm tall
    1.12mm OD
    9mm ID
    Will stand 6.55mm above the top cap
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    Top Cap:
    6mm tall
    24.05mm OD
    12.8mm ID @ drip tip insert
    There is an O-ring for drip tip
    Knurling around the top for better grip
    Chimney hole is 6.8mm ID
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    Filling Port:
    5.23mm tall
    24.05mm OD
    There are 2 bean shaped juice fill holes measuring 16.8mm X 3.75mm
    On the bottom there is a large O-ring that seals to the glass.
    On the top there is a large and a small O-ring for sealing to top cap and chimney @ drip tip.
    On this piece the chimney ID is a threaded 8.12mm ID.
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
    Deucesjack likes this.
  2. ParaTech

    ParaTech What's the DEAL? Moderator

    Joined:
    Jul 19, 2017
    Messages:
    1,651
    Likes Received:
    5,223
    Glass:
    14.8mm tall X 23.95mm OD
    [​IMG]

    Spare Glass:
    6.15mm tall X 24.05mm OD
    (will hold 2.5 ML and not require the adapter)
    [​IMG]

    Chimney:
    11.62mm tall
    11.51mm OD
    6.8mm ID @ top with an O-ring to seal
    8mm ID @ inside threaded bottom
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    Chamber:
    18.57mm tall
    24mm OD where glass sets in.
    23.12mm OD @ air flow
    22.35mm OD where base threads on.
    There are two juice flow channels measuring 15.mm X 1.3mm that go all the way through.
    2 air flow holes measuring 8.8mm X 1.8mm
    5 O-rings;
    Two of them seal @ top and bottom of AFC,
    One seals the base,
    One seals the chimney,
    One seals the glass.

    While looking at it from the top there is a raised dome like covering that is 17.83mm OD and the coils would rest right under this.
    While looking at it from the bottom there is a 17mm ID X 12mm deep cavity with a dome-ish shaped top that houses the build deck.
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    Air Flow Control (AFC) Ring:
    5.22mm tall
    24.25mm OD
    There are two 2mmX 8.5mm air holes.
    Engraved and painted is printed "BOREAS V2" on one side and "AUGVAPE" on the other.
    [​IMG]
    [​IMG]

    Base:
    6.02mm tall
    24mm OD with heavy knurling,
    5.4mm deep
    On the bottom is says "Designed by AUGVAPE" and has a serial number.
    [​IMG]
    [​IMG]
    [​IMG]
     
    Deucesjack likes this.
  3. ParaTech

    ParaTech What's the DEAL? Moderator

    Joined:
    Jul 19, 2017
    Messages:
    1,651
    Likes Received:
    5,223
    Build Deck:
    Velocity style posts, kind of....
    18.86mm tall
    16.81mm OD while measuring @ the recessed section, 17.9mm OD @ the regular section.
    There are 4 juice flow channels measuring 4.5mm X 2.26mm around the outside of the deck.
    There are 4 juice flow channels measuring 4.7mm X 3.3mm on the top side of the deck for your wicking to set in.
    The ring that seals to the O-ring in the center of the base is 9mm OD
    From the top of the posts to top of the deck is 7.9mm
    From the top of the posts to bottom of the juice port is 11.8mm
    Distance between post holes is 11mm
    Post holes are 2.7mm X 1.9mm
    One post is 4.15mm and the other is 8.9mm
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    Spare Parts Bag includes multiple O-rings, 510 drip tip adapter, and grub screws.
    [​IMG]

    There is also an allen key in the cylinder-shaped container.

    Full assembled measures 46.45mm tall.
    Excluding drip tip AND 510 it is 35.45mm tall.

    Building and wicking:
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    Coils used:
    (3X26/36SS 2.5mm ID 7 wrap from BD_Builders)

    I used .5ml to prime the wicks.
    Then I managed to fit an additional 5ml into the tank.

    On the Ijoy Captain PD270
    [​IMG]

    On the Smok Alien
    [​IMG]

    On the Sigelei Fuchai 213
    [​IMG]

    On the Smok Pro Color
    [​IMG]

    On the Smoant Battlestar
    [​IMG]

    On the Smok T-Priv
    [​IMG]

    On the Vaptio N1 Pro Lite
    [​IMG]

    Provides good flavor
    Easy fill
    Easy to use and maintain
    Good airflow
    Solid build
    5ml and 2.5ml versatility
    No leaking issues for me at any point including fill ups. (I did NOT have to burp it or do anything special)
    I did not experience and airlock or vapor lock troubles.
    No single coil option at this time
    This thing drinks juice faster than a 75 Cadillac I used to have went through fuel when you stomped the pedal.
    While the airflow can be closed down fairly tight and you "could" MTL from it, I don't think many would appreciate it that way.
     
    Deucesjack likes this.
  4. ParaTech

    ParaTech What's the DEAL? Moderator

    Joined:
    Jul 19, 2017
    Messages:
    1,651
    Likes Received:
    5,223
    Manufacture info:
    http://www.augvape.com

    http://www.augvape.com/product/boreas-v2

    https://www.facebook.com/Augvapeofficial/posts/1743851295917779

    https://www.aliexpress.com/store/product/Augvape-Boreas-V2-RTA-Atomizer-2-5ml-5ml-Capacity-Angled-Upwords-Airflow-Chimney-Tube-Adapter-Electronic/3093098_32831438378.html?spm=2114.12010615.0.0.5ce5139etn11cQ


    Manufacture Provided Specs:
    Features:
    — Angled Upwards Airflow.
    — Chimney Tube Adapter
    — 24*41.8 mm With Chimney Tube Adapter
    — 24*33.1mm Without Adapter
    — Capacity 5 ML (2.5 ML Without Adapter)
    — 304 Stainless Steel
    — 810 Delrin Drip Tip & 510 Adapter

    Package:
    1 x Boreas V2
    1 x Long Glass Tube
    1 x Short Glass Tube
    1 x Allen Key

    1 x Accessory Bag

    Manufacture Pics:
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
    Letitia, jimi, Inspects and 1 other person like this.
  5. Deucesjack

    Deucesjack Well-Known Member 1 year member reviewer

    Joined:
    Jul 17, 2017
    Messages:
    3,474
    Likes Received:
    10,472
    Nice review Para. Great pics as always.

    Sent from my SM-N950U using Tapatalk
     
    Letitia, jimi, ParaTech and 1 other person like this.
  6. Inspects

    Inspects Well-Known Member

    Joined:
    Aug 8, 2017
    Messages:
    698
    Likes Received:
    3,658
    Good review, PT....Augvape sent me the B2 about two months ago...haven't had the spare time to try it....now I will----:)
     
  7. ParaTech

    ParaTech What's the DEAL? Moderator

    Joined:
    Jul 19, 2017
    Messages:
    1,651
    Likes Received:
    5,223
    Thanks Deucesjack
     
  8. ParaTech

    ParaTech What's the DEAL? Moderator

    Joined:
    Jul 19, 2017
    Messages:
    1,651
    Likes Received:
    5,223
    Thanks Inspects
    I've spent plenty of quality time with it to ensure it was all it was intended to be.
    I've heard of differing opinions so be sure to post your thoughts once you've had time to check it out.
     
    Inspects, Deucesjack and jimi like this.
  9. Letitia

    Letitia Well-Known Member

    Joined:
    Sep 6, 2017
    Messages:
    480
    Likes Received:
    1,634
    Good write up, enjoyed the read. Thanks ParaTech.
     
    Inspects, ParaTech and Deucesjack like this.
  10. ParaTech

    ParaTech What's the DEAL? Moderator

    Joined:
    Jul 19, 2017
    Messages:
    1,651
    Likes Received:
    5,223
    Thanks Letitia
     
    Letitia, Inspects and Deucesjack like this.

Share This Page