New Arrival, STNG MTL RDA-Wotofo First MTL RDA!

Discussion in 'Wotofo' started by WotofoOfficial, Sep 17, 2019.

  1. WotofoOfficial

    WotofoOfficial Active Member

    Joined:
    Jul 26, 2018
    Messages:
    128
    Likes Received:
    91

    INTRODUCING THE STNG MTL RDA!
    [​IMG]
    WOTOFO STNG MTL RDA is co-designed by the YouTube reviewer Vapor Place (a.k.a Uncle Stas), a Russian vaper with informative tutorials on his vaping channel. It is 22mm in diameter and serves to meet the demands of all mouth-to-lung or nic salts vapers.

    MTL-FOCUSED DRIP TIP
    COMES RIGHT ONTO THE TOP

    [​IMG]
    The narrow looking drip tip appears pretty nice with the overall design of this rebuildable dripping atomizer. The drip tip features 510 connection to meet the market standard. It fits into your mouth perfectly when doing mouth-to-lung inhales. It’s made to let you enjoy your thick and rich draws of nicotine hits mouth to lung.


    CONTROLLED AIRFLOW FALLS INTO
    THE CATEGORY OF CLASSIC DESIGN
    [​IMG]
    The STNG MTL RDA features a droplet shaped air control design on its top cap. This amazing and classic design allows users to set their favorite airflow as freely as possible. The droplet air inlet resides on only one side of the top cap, so do put that side onto the deck side with air hole on.

    SINGLE-SIDED AIR INLET
    INTEGRATED WITH DUAL CHANNELS

    [​IMG]
    On entering the single-sided air inlet, the air is pulled into the center of the deck bottom and redirected into two air channels that are right underneath the coil spot, supplying double airflows right onto the coil. Such air splitting system provides soft and optimal vaporization.

    COIL INSTALLING
    IS WITH EASE
    [​IMG]
    The spring-loaded post clamps are T-shaped to give convenient mounting for different coil directions. No need to remove the screws when installing coil, just loosening the screws a little will do. The coil is secured by top mounted Phillip screws on two sides, positioned right above the air supply holes.


    SIMPLE, COMPACT,
    AND SQUONK-FRIENDLY
    [​IMG]
    The STNG MTL RDA is simple and compact in appearance. Bottom feeding is adopted to make juice feeding much easier, since MTL drip tips are basically all narrow in shape which makes direct dripping from drip tip impossible. But you can still pull off the top cap to do drips if you are more of a dripper person, just replace the squonk pin with the solid pin from the accessory bag.


    COLORS AVAILABLE
    [​IMG]

    SPECIFICATIONS
    RDA Type: MTL RDA
    Build Deck Diameter: 22mm
    Coil Configuration: Single Coil
    Wattage Range: 5-30W
    Recommended Ohm Value: 0.4-1.8ohm
    Overall Height: 43.15mm (with drip tip and 510 pin)
    Threading: 510 Thread
    Body Material: Stainless Steel
    Juice Feeding Method: Drip / Squonk
    Insulator Material: German PEEK


    INCLUDED COIL SPECS
    1. Dual Core Fused Clapton Coil

    Recommended for normal nicotine vaping
    Material: Ni80 30G*2+38G
    Resistance: 0.75ohm
    Inner Diameter: 2.5mm
    Number of Wraps: 6 wraps


    2. Single-Strand Coil
    Recommended for nic salts vaping
    Material: Ni80 28G
    Resistance: 1.2ohm
    Inner Diameter: 2.5mm
    Number of Wraps: 9 wraps


    WHAT’S IN THE PACKAGE

    1pc STNG MTL RDA
    1pc Dual Core Fused Clapton Coil
    1pc Single-Strand Coil
    1pc User Manual
    1pc Extra Drip Tip
    1pc Cross Head Screwdriver
    1pc Allen Key
    1pc Cotton Strip
    1bag O-rings


    Let Your Throat Be The Judge: WOTOFO STNG MTL RDA
     
  2. WotofoOfficial

    WotofoOfficial Active Member

    Joined:
    Jul 26, 2018
    Messages:
    128
    Likes Received:
    91
    Dual core fused clapton coil on STNG MTL RDA
    [​IMG]
     

Share This Page